1 Introduction

1.1 Getting Started

This White Paper is intended as a guide for the configuration of Escaux Asterisk PBX to connect to the voipGATE service.
The intended audience of this document is the PBX Administrator or Network/Solutions Integrator of the Escaux Asterisk PBX.
Unless otherwise stated please use the default settings.

1.2 Version Compatibility

The build versions utilised in this series of testing are;
voipGATE version utilised: 1.4.r.75450
Escaux Asterisk version utilised:

• SMP v1.4
• SIP outgoing Trunk Resource Version: 1.31 (see 3.1)
• Module Configuration: Asterisk 1.2x Version 2.16

NOTE: Please note that differing results of compatibility may be experienced on other releases/versions of the same product line. Always ensure you have the latest voipGATE software release installed.

1.3 Latest Information

All information presented in this document is current at time of writing.
The latest information regarding voipGATE compatibility and testing should be sourced directly from the voipGATE Support page which you can find at: www.voipgate.com
Or, conversely, if you have tested a version that is not present on our Support site, please feel free to post your findings on our Forum: www.voipgate.com/forum
The product’s pictures and names mentioned in this document are trademarks or registered trademarks of their respective owners. VoipGATE SA does not claim any ownership rights to these pictures, products, logos and brands.

2 voipGATE Settings

2.1 Settings / Advanced / VoIP Settings

Login into your voipGATE account and go to “VoIP Settings” tab and configure your settings as per bellow.

2.2 Settings / Dial Options

Configure the “Dial Options” tab as per below. Please note that it is important to choose an “International prefix” of “00”

3 Escaux Settings

3.1 SIP outgoing Trunk Resource configuration

a) Configure Interface Parameters as per screenshot below.

4 Using voipGATE

4.1 Making Test Calls

After successfully configuring your voipGATE Service you should validate your settings by performing the following series of calls:
a)    Local to Fixed Local call
b)    Local to Mobile call
c)    Local to other Fixed National number (same country different area code)
d)    Local to Fixed International call
e)    Local to Mobile International call
f)     Test each DID number (if purchased/created)

4.2      voipGATE Support

voipGATE Support can be obtained via our web portal which can be found at: www.voipgate.com/site/index.php/support
Or by contacting voipGATE Support directly @: This e-mail address is being protected from spambots. You need JavaScript enabled to view it