3 Mitel 3300 Configuration

To avoid possible interruption or potential loss of all services and communications we recommend that the configuration of the Mitel 3300 only be performed by an approved Mitel Administrator or Technician. Please contact your nearest Mitel Partner representative of Mitel Solutions Integrator for assistance.

3.1 Required information for configuration

Refer to your Welcome Email from voipGATE to ensure you have the following info ready

• STUN Server
• STUN Port
• Outbound Proxy
• SIP/IAX Proxy/Registrar
• SIP/IAX User ID
• SIP/IAX Authenticate ID
• Password
• Time Server

4 Mitel 3300 Setup

4.1 Add/Change Network Element Assignment

In System Administration go to: Mitel >System Administration Tools > System Configuration > Voice Network Configuration > Network Element Assignment

Click “Add” Network Element Assignment. Unless otherwise stated leave all other fields blank or default.

4.2 Add a new SIP Profile

Go to: System Configuration > Trunks > IP Networking/XNET > SIP Peer Profile

Complete the necessary fields. Unless otherwise stated leave all other fields blank or default.

4.3 Configure the necessary Trunk Servuce Assignment

4.4 Create SIP Peer Profile Assignment by incoming DID

Go to: System Configuration > Trunks > SIP peer Profile Assignment by Incoming DDI

4.5 Create ARS Digits Dialed Assignments

Go to: System Configuration > Trunks > Automatic Route Selection (ARS) > ARS Digits Dialed Assignments

This needs to be done so that a Route Assignment can be configured in the next Step. In this example when Digit “7” is dialled Route Number “9” is chosen for termination.

4.6 Create Route Assignment

Go to: System Configuration > Trunks > Automatic Route Selection (ARS) > Route Assignment
Define Route 9 to SIP Peer Profile.